AMSOIL European 100% Synthetic 5W-40
Motor Oil (AFL)
European Car Formula 100% Synthetic 5W-40
Motor Oil (AFL)
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum
Product
Description
AMSOIL European Car Formula 100% Synthetic 5W-40 Motor Oil
(AFL) is specially formulated for the lubrication needs of
modern European gasoline and diesel cars and light trucks.
Formulated with advanced AMSOIL synthetic base stocks, premium
additives and a 5W-40 viscosity rating, AMSOIL AFL is the
preferred oil for virtually all European automobiles,
especially turbo charged models. It is one of the only oils in
North America to be recommended for the latest specifications
of all three major European automakers - Volkswagen (Audi), BMW
and Mercedes-Benz and the latest North American API
specification. AMSOIL AFL is highly versatile for multiple
applications.
AMSOIL, the leader in automotive
synthetic lubrication, produced the world's first API qualified
synthetic motor oil in 1972. Trust the extensive experience of
AMSOIL The First in Synthetics® to do the best
job protecting your engine.
Maximum Engine
Protection
AMSOIL 100% Synthetic European Car Formula contains high
quality anti-wear additives and surpasses the tough ACEA oil
specifications for high temperature/high shear viscosity. It
provides outstanding protection in high RPM, hot running
engines and delivers dependable long-term performance for the
extended drain intervals set by European automakers.
Superior Engine
Cleanliness
The excellent oxidation stability, heat resistance and
detergency properties of AMSOIL Synthetic European Car Formula
keep engines clean. It is specially designed to prevent sludge
and varnish deposits for reduced oil consumption, extended
engine life and maximum overall performance.
Minimizes Exhaust
Emissions
AMSOIL European Car Formula is designed for newer vehicle
emission control systems. It meets current industry and vehicle
manufacturer requirements for long life protection of gasoline
vehicle catalytic converters and diesel particulate filters
(DPF).
All Season
Performance
The broad 5W-40 viscosity rating, low volatility (burn-off) and
wax free nature of AMSOIL Synthetic European Car Formula make
it excellent for hot and cold temperatures. Engine wear is
reduced, oil thickening is controlled and vehicles start easier
in cold temperatures.
APPLICATION
AMSOIL
100% Synthetic European Car Formula is formulated to surpass
the most demanding European specifications. It is recommended
for European and North American gasoline or diesel vehicles
requiring any of the following worldwide
specifications:
- API SM/CF
- ACEA C3-04
- ACEA A3/B3-04
- ACEA A3/B4-04
- ACEA C3
- BMW LL-04
- Mercedes Benz 229.31, 229.51
- Porsche
- Saab
- Volvo
- Volkswagen 502.00, 505.00, 505.01
- DaimlerChrysler MS-10725
Service Life
Recommended for the extended drain intervals established by the
vehicle manufacturer or extend based on oil analysis. Change
oil filter at time of oil change.
Mixing AMSOIL
AMSOIL AFL is compatible with conventional and synthetic motor
oils. Mixing AMSOIL motor oils with other oils, however, will
shorten the life expectancy and reduce the performance
benefits. AMSOIL does not support extended drain intervals
where oils have been mixed. Aftermarket oil additives are
not recommended for use with AMSOIL
motor oils.
Health &
Safety
This product is not
expected to cause health concerns when used for the intended
application and according to the recommendations in the
Material Safety Data Sheet (MSDS). An MSDS is available upon
request at 715-392-7101 or on the AMSOIL Website. Keep Out
of Reach of Children. Don't pollute. Return used
oil to collection centers.
|
TYPICAL PHYSICAL
PROPERTIES
|
|
AMSOIL Synthetic 5W-40
European Engine Oil (AFL)
|
| Kinematic Viscosity @ 100°C, cSt (ASTM
D445) |
13.7
|
| Kinematic Viscosity @ 40°C, cSt (ASTM
D445) |
79.7
|
| Viscosity Index (ASTM D2270) |
177
|
| Cold Crank Simulator Apparent Viscosity @
-35°C, cP (ASTM D5293) |
5121 (-30)
|
| Pour Point °C (°F) (ASTM D92) |
-42(-44)
|
| Flash Point °C (°F) (ASTM
D-92) |
230 (446) |
| Fire Point °C (°F) (ASTM D92) |
246 (474)
|
| Four Ball Wear Test @ 40 kgf, 75°C 1200
rpm, 1 hour, scar diameter, mm (ASTM D-4172) |
0.44
|
| Noack Volatility
(ASTM D5800) 250°C for 1 hour, % weight
loss |
8.7
|
| High
Temperature/High Shear Viscosity 150°C cP, X°C, X
s-1 (ASTM D4683) |
4.6
|
| HTHS (cP)
(ASTM D-4683) |
3.7
|
| Total Base Number |
8.0
|
Can't find what you're looking for? Pick an option
below:
This content block is currently not available. Please contact RSS feeds service support team.
| 
