Synthetic Manual
Transmission and Transaxle Gear Lube (75W-90)
Synthetic Manual Transmission and Transaxle Gear Lube
75W-90 API GL-4
(MTG)
Specifically formulated for the most demanding manual
transmission and transaxle applications
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
5-Gallon Pail
55-Gallon Drum
AMSOIL Transmission fluid recommendations for Cars and Light
Duty Trucks
PRODUCT DESCRIPTION
AMSOIL Synthetic Manual Transmission and Transaxle Gear Lube
(MTG) is a premium blend of the finest synthetic base oils and
advanced, high-performance additives. It is formulated
specifically for maximum protection in the most demanding
manual transmission and transaxle applications where an extreme
pressure GL-4 gear lube is specified, including those where
high horsepower/high torque engines and towing or heavy loads
increase transmission stress.
AMSOIL MTG prevents the thinning effects of
mechanical shear. It maintains its viscosity and superior film
strength for consistent, long-lasting wear protection. MTG
excels in hot and cold temperature extremes that exceed the
limits of conventional mineral oils. It protects against rust,
keeps seals soft for long life, and is compatible with brass
synchros for smooth synchromesh shift quality.
Ideal for NV-4500
Transmissions
MTG is a thermally stable, extreme pressure formulation that
resists heat, oxidation, acid build-up and varnish. It is the
ideal gear lube for high temperature applications, including
the New Venture NV-4500 transmission, which retains heat due to
its cast iron housing and is often subjected to heavy loads and
high torque from turbo-diesel engines.
AMSOIL MTG is the replacement fluid for GM
part #12346190 and Chrysler part #4874459 (Chrysler
specification #MS-9070).
Ideal for Muscle Car
Transmissions
The extreme pressure design of MTG reduces friction, heat and
wear. It withstands the high horsepower and quick shifts common
to muscle cars equipped with large-displacement
engines.
Ideal for Front Wheel Drive
Transaxles
The advanced synthetic formulation provides ultimate protection
for gears and bearings in front wheel drive
transaxles.
Excellent for Service
Centers
MTG is a versatile transmission and transaxle lubricant. It
reduces inventory needs, is readily available and is cost
effective compared to vehicle OEM-branded products.
Performance Features
• Reduces friction, heat and wear
• Superior high temperature stability
• Resists heat, oxidation, acid build-up and varnish
• Lasts two times longer than conventional petroleum
oils
• Improves cold weather shifting
Applications
Recommended for synchronized manual transmissions and
transaxles that require 75W-85, 75W-90 or 80W-90 viscosities
and any of the following performance specifications: API GL-4
and MT-1, ZF TE-ML 02B, 16A, 17A and 19A, Chrysler MS-9070, MAN
341 ML. Recommended for use in NV 4500 transmissions, and
replaces GM part #12346190 and Chrysler part #4874459.
Meets GL-4 performance specifications
required by some models of Acura, Hyundai, Infiniti, Kia, Land
Rover, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki,
Toyota, Volkswagen, Hino Mitsubishi-Fuso, and Zetor. Ideal for
muscle car transmissions such as Muncie, Borg Warner, Saginaw,
Ford Toploader, Dearborn and New Process. Also recommended for
Gear Vendors Gear Splitters.
Service Life
Under normal operating conditions AMSOIL MTG will last two
times longer than conventional petroleum GL-4 gear oils. Where
the original equipment manufacturer (OEM) recommends synthetic
oils, follow the OEM drain interval (such as NV 4500).
|
TYPICAL TECHNICAL
PROPERTIES
Revised as of 7/07
|
|
Synthetic Manual
Transmission and Transaxle Gear Lube 75W-900
(MTG)
|
| Kinematic
Viscosity @ 100°C, cSt (ASTM
D-445) |
14.7
|
| Kinematic
Viscosity @ 40°C, cSt (ASTM
D-445) |
84.5
|
| Viscosity
Index (ASTM D-2270) |
181
|
| Copper
Corrosion (3 hr, 121°C) (ASTM
D-130) |
1B
|
| Flash
Point °C (°F) (ASTM D-92) |
204
(399)
|
| Pour
Point °C (°F) (ASTM D-97) |
-46
(-51)
|
| Four Ball
Wear Test, Scar in mm; 40 kg, 75°C, 1200 rpm,
1 hr (ASTM D-4172B) |
0.45
|
| Foam
Stability (ASTM D-892) (20/50/20) |
0/0/0
|
| Brookfield Viscosity
(cP) |
-40°C
= 44,200
|
Can't find what you're looking for? Pick an option
below:
This content block is currently not available. Please contact RSS feeds service support team.
This content block is currently not available. Please contact RSS feeds service support team.
| 
