AMSOIL Super
Shift® Racing Transmission Fluid

Super Shift® Racing
Transmission Fluid (ART)
Formulated for High-Horsepower and High-Torque
Applications

PRODUCT
DESCRIPTION
AMSOIL Synthetic Super Shift® Racing Transmission Fluid is
specifically formulated for automatic transmissions operating
in high-horsepower and high-torque conditions. AMSOIL
SuperShift contains top-quality additives selected specifically
for racing applications. Its unmatched transmission friction
performance provides high holding capacity for maximum torque
transfer and brake power, reduced wear and longer clutch plate
life. Super Shift virtually eliminates slippage, promotes
positive clutch engagement and improves overall shift
performance, helping racers improve on elapsed
times.
Wear
Protection
AMSOIL Synthetic Super Shift Racing Transmission Fluid contains
a robust additive system for extra protection, and its shear
stable base oils prevent viscosity loss throughout its service
life. Super Shift provides long-term protection against
equipment wear, even when the equipment is frequently subjected
to sustained periods of applied pressure or high horsepower and
high torque. Clutches, bearings and bushings last longer,
saving money on transmission repairs.
Extreme Temperature
Performance
AMSOIL Synthetic Super Shift Racing Transmission Fluid is
highly effective against heat and wear, reducing transmission
temperature and minimizing or eliminating burned up
transmissions. Its superior oxidative and thermal stability
inhibits the formation of varnish, deposits and sludge so
equipment runs clean. Super Shift acts as a heat transfer fluid
and by controlling clutch slippage it helps reduce operating
temperatures of hot transmissions by up to 50°F. In low
temperatures, Super Shift flows readily for dependable startup
and post-startup protection.
Copper Corrosion,
Rust and Foam Inhibition
AMSOIL Synthetic Super ShiftRacing Transmission Fluid protects
equipment from copper corrosion and rust, even during equipment
storage. It controls foaming for reduced component wear and
responsive clutch plate engagements.
RECOMMENDATIONS
AMSOIL Synthetic Super Shift Racing Transmission Fluid is
recommended for automatic transmissions coupled to high
horsepower, high torque engines. It is also recommended where
heavy loads place a high demand on transmissions.
Recommended where Allison C-4 or Ford Type F is
required. Suggested automatic transmission
applications:
• Drag Racing Cars and Trucks
• Monster Trucks
• Stock Cars
• Off Road 4x4 Vehicles
• Street Hot Rods
COMPATIBILITY AMSOIL
Synthetic Super Shift® Racing Transmission Fluid is fully
compatible with other fluids. However, a mixture of
AMSOIL Super Shift® and another oil will decrease
performance and offer a shorter service life than pure
AMSOIL Synthetic Super Shift® Racing Transmission
Fluid.
Note: AMSOIL Synthetic Super Shift® Racing
Transmission Fluid is not recommended as a replacement for Ford
Mercon®, GM Dexron® or Chrysler ATF+ type fluids in passenger
vehicle and truck transmissions as it may cause erratic shift
patterns, chattering or noise. AMSOIL is not responsible for
transmission performance inconsistent with those specifications
listed and where transmissions have been modified from the
original manufacturer’s design.
HEALTH & SAFETY
This product is not expected to cause health concerns when used
for the intended application and according to the
recommendations in the Material Safety Data Sheet (MSDS).
MSDS's are available upon request at 715-392-7101 or
on
our website. Keep Out of Reach of
Children. Don't pollute. Return used oil to
collection centers.
|
TYPICAL TECHNICAL
PROPERTIES
Revised as of 7/07
|
|
Synthetic Manual
Transmission and Transaxle Gear Lube 75W-900
(MTG)
|
| Kinematic
Viscosity @ 100°C, cSt (ASTM
D-445) |
7.1
|
| Kinematic
Viscosity @ 40°C, cSt (ASTM
D-445) |
41.3
|
| Viscosity
Index (ASTM D-2270) |
133
|
| Copper
Corrosion (3 hr, 121°C) (ASTM
D-130) |
1B
|
| Flash
Point °C (°F) (ASTM D-92) |
248
(278)
|
| Pour
Point °C (°F) (ASTM D-97) |
-49
(-56)
|
| Four Ball
Wear Test, Scar in mm; 40 kg, 75°C, 1200 rpm,
1 hr (ASTM D-4172B) |
0.35
|

Can't find what you're looking for? Pick an option
below:
This content block is currently not available. Please contact RSS feeds service support team.
This content block is currently not available. Please contact RSS feeds service support team.
|